Products

TK 1256

• Compact design for easy transportation to wherever it is needed
• Permits accurate cuts on up to 56 mm thick workpieces
• Machine frame made of distortionfree sheet steel
• Anodized die-cast aluminium table
• Sturdy, quiet-running single-phase AC induction motor
• Saw shaft mounted in double ball bearings
• Belt drive provides for high saw-blade speed
• Tungsten carbide-tipped saw blade for ripping and cross-cutting
• The saw blade can be canted up to 45° for bevel cutting. The set height of cut can be read off at any angular position of the saw blade
• All operating elements can be actuated from the front of the machine
• Sturdy rip fence with - auxiliary fence that can be slid along the rip fence and can also be fitted to the rip fence so that its low guide surface is on the saw-blade side, - rear clamp which can be actuated from the front, - magnifier for reading off the set cutting width
• Guide rail for the rip fence with adjustable scales
• The rip fence can also be fitted to the left of the saw blade
• Cross cutting fence suitable for mitre cuts up to 60°
• Switch with cover that can be locked with a small padlock to prevent unauthorized use
• Motor with thermal overload trip for long service life
• No-voltage release switch. In the event of interruption in the electricity supply the motor will not automatically restart when the power supply is restored
• Provision for connecting an extraction unit to the machine for efficient sawdust extraction. The sawdust can in addition be extracted through the connection at the top of the blade guard
• Sawdust-tested by FPH in compliance with TRGS 553
• With tungsten carbide-tipped blade 23778 (accessory) also suitable for cutting plastics and nonferrous metals
• Versatile through the wide range of accessories, e.g. sliding table, table side and rear extensions

• Height of cut adjustable 0-56 mm
• Saw-blade diameter 167 mm
• Suitable for bevel cutting to 45O
• Max height of cut at 45° bevel cutting 38 mm
• Rated input 1.6 kW*
• Output power 1.2 kW*
• Max. speed 4900 rpm
• Stalling torque 4.5 in-lbs
• Dimensions of table 450 x 572 mm
• Height to table top 272 mm
• Weight 33 kg *S6 - 40% Duty cycle