Products

TKU 1693

• Permits accurate sawing of workpieces up to 83 mm thick
• Cutting speed of 57 m/s for excellent cut quality
• Machine housing made of distortion-free sheet steel
• Anodized tables made of die-cast aluminium
• Sturdy, quiet-running induction motor
• Saw shaft mounted in double ball bearings
• Saw blade can be tilted from -1,5° to 46,5° for bevel cutting, so undercuts are also possible. Lock-in positions at 0° and 45°
• All the controls are operated from the front of the machine
• Sturdy rip fence with fine adjustment of cutting width and magnifier for reading off the set distance between fence and saw blade
• Cross-cut fence for mitre cuts with angles up to 60° - with adjustable aluminium scale for precise setting of the distance between the end stop and the saw blade. - The end stop of the cross-cut fence allows several workpieces up to 1.15 m long to be cut to the same length. - Magnifier for reading off the distance between fence and saw blade
• Sliding table mounted in needle bearings and reaching up to the saw blade - Maximum cutting length, - with the 920 mm long sliding table: 800 mm, - with the 1,800 mm long sliding table: 1,450 mm
• Switch with lockable cover to prevent unauthorized use of the machine (child lock)
• Integral power socket for connecting an extraction device. Machine and extraction device can thus be switched on and off simultaneously
• Electromechanical motor brake
• Thermal overload trip for long motor service life
• No-voltage-release switch for operator safety. If the power supply is interrupted, the motor will not automatically start up again when power is restored
• Connection for an extraction device at the rear of the machine Additional connection nozzle on the blade guard
• Saw dust-tested by FPH in comp-liance with TRGS 553
• With tungsten carbide-tipped saw blade 23 813 (accessory) also suitable for cutting plastics
• Wide range of accessories for greater versatility, e.g. table side extension, rear extension and scoring kit
• Pull-out handles for convenient transportation

• Max. height of cut 83 mm
• Saw blade diameter 250 mm
• Saw blade tilting range -1,5° to 46,5°
• Max. height of cut at 45° bevel 55 mm
• Max. workpiece width when used as cut-off/mitre saw 330 mm
• Rated input 2.1 kW*
• Output power 1.6 kW*
• Max. speed 4400 rpm
• Stalling torque 5.4 in-lbs
• Extraction connections
  - on the machine dia. 58 mm
  - on the blade guard nozzle dia. 35 mm
• Dimensions:
  Machine table (without sliding table) 345 x 810 mm
  Height to top surface of machine table 370 mm
  Short sliding table 220 x 920 mm
  Long sliding table 220 x 1800 mm
  Transverse table 500 x 400 mm
• Weights:
  Machine without sliding table or transverse table 60 kg
  Short sliding table with guide rail 14 kg
  Long sliding table with guide rail 26 kg
  Transverse table with fence 9 kg

• Max. height of cut 83 mm
• Saw blade diameter 250 mm
• Saw blade tilting range -1,5° to 46,5°
• Max. height of cut at 45° bevel 55 mm
  Max. workpiece width when used as cut-off/mitre saw 330 mm
  Rated input 2.7 kW*
• Output power 2 kW*
• Max. speed 4400 rpm
• Stalling torque 10.5 in-lbs
• Extraction connections
  - on the machine dia. 58 mm
  - on the blade guard nozzle dia. 35 mm
• Dimensions:
  Machine table (without sliding table) 345 x 810 mm
  Height to top surface of machine table 370 mm
  Short sliding table 220 x 920 mm
  Long sliding table 220 x 1800 mm
  Transverse table 500 x 400 mm
• Weights:
  Machine without sliding table or transverse table 60 kg
  Short sliding table with guide rail 14 kg
  Long sliding table with guide rail 26 kg
  Transverse table with fence 9 kg